UCoustic 9210 manual V1
3
The way a cabinet should sound
Thermal Considerations:
To maximise the thermal capabilities of the
UCoustic 9210 we strongly recommend all
spaces on and around the front 19” area is
filled.
The sealing of the front face of the 19” area
ensures no recirculation of hot air; any air
gaps
will
impact on the amount of heat
removed from the cabinet.
Empty space on the 19” area can be filled
using soundproof 19” quick fit blanking panels;
see the selection of sizes below.
Quick fit soundproof
blanking panels
Left side infill
Left side infill
19” Foam infill
Front to rear
Infill foam
There is a gap above and below the 19” area
even after all the equipment and blanking
panels have been fitted, we recommend that
this space be filled using the 19” infill foam
supplied with cabinet (Please see Pic 1)
NB:
It is important to ensure once fitted the
foam does not cover any of the equipment’s
vents.
Once installation is finished or following any
refits, cabling, which runs from front 19” face
to the rear of the cabinet via the top and
bottom of the left hand and right hand infill’s
that the resulting air gaps around the cabling
be filled with the supplied infill foam. (please
see Pics 1 and 6)
Order codes for soundproof 19” quick
fit blanking panels are as follows:
1U RA0-0201-AA
2U RA0-0202-AA
3U RA0-0203-AA
5U RA0-0205-AA
Pic 1
Front view UCoustic 9210 complete with blanking panels
