BATTERY INSTALLATION
USAGE
3
4
BATTERY INSTALLATION
The massager operates using 4 AAA Batteries
(2 batteries per each battery compartment).
1. Open one of the Battery Compartments
located on both sides of the controller unit.
Lift cover. Refer to Diagram on right.
2. Insert 2 AAA Alkaline Batteries (not included)
inside the compartment. Observe polarity.
Do not mix old and new batteries.
3. Place the Battery Compartment cover back on.
4. Repeat for the other side.
5. When the massager starts operating sluggish,
it’s time to replace the batteries. Follow the above
directions to replace the batteries.
One of the sides of the
Battery Compartments shown.
4. Next, press ON/OFF - TIME button to select the massaging time. Choose between
5/10/15 minutes.
5. Slide the eye massager mask over your eyes. Adjust the elastic band for a proper fit.
6. During operation blue LED lights on the Eye Massager mask will flash. The selected
function icons on the control panel will be lit.
USAGE
1. Place the Eye Mask on. Place it around your forehead while making your selections.
2. Press the ON/OFF-TIME button to turn the Electronic Eye Massager on.
3. Press the button (in the center of the control panel) to select
1 of 7 massage modes:
1. Auto
- will cycle through all 3 functions: Airbag, Heat and Vibration
2. ViHeat
3. Vibration
4. Heat
5. Vibration only
6. Airbag only
7. Heat only
(press again to advance to 1. Auto)
