Uclear HBC200 Скачать руководство пользователя страница 29

Страница: 29 / 36

Troubleshooting Operational Tips

-During the group intercom session, if your phone causes problem to your HBC200,

please disconnect your phone from the device.

Notices

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules

These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-- Consult the dealer or an experienced radio/

TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. End user must follow the specific operating instructions for satisfying RF

exposure compliance. This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio waves

established by the Federal Communications Commission (USA). These requirements

set

a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value

reported under this standard during product certification for use when properly worn

on the body is

0.044 W/kg.

Содержание HBC200





































Результаты поиска

Содержание HBC200

Отзывы:

Бренды по названию

Популярные бренды

Uclear HBC200, Руководство пользователя

Результаты поиска

Содержание HBC200

Отзывы:

Бренды по названию

Популярные бренды