Uclear HBC200, Руководство пользователя

Страница: 22 / 36

EN
21
Intercom Operations
Large Group Intercom (Three parties or more)
You can daisy-chain multiple HBC200 units to form bigger group intercom. A
chain of 10 or more parties is achievable.To setup group intercom, you must first
pair all the HBC200 units. Pairing process needs to be carried out only once.
unless your group of riders changes.
Pairing
1.Power off all the HBC200 control units first.
2.Pick one unit as the 1st device, hold Answer and Down button for approximately 3
seconds. Remove your fingers as soon as you see the light come on. The status
indicator will begin to blink blue and then purple.
3.For the 2nd device, hold Answer and Up buttons for 3 seconds releasing when you see
the light come on. The status indicator will blink blue then purple. Wait until the 1st device
status indicator blink blue twice every 2 seconds, and then proceed to pair the next device.
4.Hold 3 seconds Answer and Up buttons on the 3rd device releasing when you see a
light come on, and then status indicator will blink purple. Wait for the 2nd device status
indicator to blink blue twice every 2 seconds, and then proceed to pair the next device.
5.Repeat above step 4 for all other units until all the devices are paired.
6.The last device will be blinking purple. You can then press any button on the last
device to end the pairing process, the status indicator should turn blue.
It is recommended that after the pairing process is successful, restart all UCLEAR
control units.
Start Intercom
•To start/connect the intercom, hold the Up button for 2 seconds.
•All the devices will be chained up automatically, in the same sequence same as
performed during the pairing process.
Stop Intercom
•To stop the intercom, hold the Down button for 2 seconds.
All the devices in the chain will be disconnected automatically.
Helmet 1
( 1st device)
Hold Answer
and Down Button
Helmet 2
( 2nd device)
Hold Answer and Up Button
Helmet 3
(3rd device)
Hold Answer and Up Button
Helmet 4
( 4th device)
Hold Answer and Up Button
and more ……