manualshive.com logo in svg

UCHIDA AeroCut, Руководство по эксплуатации

Поделиться
Скачать
UCHIDA AeroCut Скачать руководство пользователя страница 16

(8) How to attach the perforator 

 

① 

Power it off. 

② 

The perforator is stowed below the feed table. 

③ 

Detach the gear cover located at the paper exit and attach the perforator.   

④ 

The gear cover can be attached where the perforator was initially placed. 

⑤ 

The target paper weight for the perforator is 65 lbs (Cover stock) [176 g/

㎡

]or less. 

⑥ 

The combined use of the perforator and the creaser on the same paper may cause a paper 

jam or a mechanical failure.     

 

Perforator

 

Gear cover

 

 

 

 

 

 

 

 

 

 

 

 

Caution 

：

  Be sure to install Gear cover or Perforator unit !   

For safety reason, machine doesn't work with cover open, or if these parts are not in 

place. 

 

 

 

 

 

             

Caution 

 

 

Power it off. Otherwise,   

 

１５

Injury could occur.

 

The maximum paper weight for use is 65 lbs (Cover 
stock) [176 g/

㎡

]

 

for the perforator. Using a heavier 

paper may cause a paper jam or a mechanical failure. 

 

Combined use of the perforator and creaser may 
cause a paper jam or a mechanical failure 

 

 

Attach the gear cover when the perforator is not in use, 
as it may cause injury.   

 

Содержание AeroCut











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды