AeroCut XPro OPERATION MANUAL
13
・
When the number of sheets is 1 or more, the machine will process the number of the
sheets entered, which becomes one set.
・
The machine stops running when the number of sets processed reaches the number
of sets entered.
・
When the number of sets is 2 or more, the machine goes into an interval after each
set completed.
・
During the interval, the machine stops feeding until the entered interval time is
elapsed.
③
Touch the screen to have CUT MARK to activate cut-mark registration.
When it is on, the machine reads the cut-mark and cross cuts at proper positions
even the image is drifted.
2.5
Set
①
With a press of SET button, the slitters will move to the positions according to the
selected cut pattern.
②
At the same time, Feed table will move to the lower end position.
③
START button will be indicated upon all slitters are completely set.