UC Living Rosmore Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 28

UC Living Rosmore Скачать руководство пользователя страница 19

LT---- Iss - (--/--)

19

UC Living Fires

UC Living Rosmore

THIS IS YOUR EXTENDED FIVE YEAR PARTS

WARRANTY

PLEASE READ IT CAREFULLY AND ENSURE YOUR INSTALLER HAS FILLED IN
THE FIRST PORTION, KEEP IT IN A SAFE PLACE SO THAT IT IS AVAILABLE
WHEN YOUR

GAS SAFE

ENGINEER CARRIES OUT THE ANNUAL SERVICE.

THIS IN NO WAY REDUCES YOUR STATUTORY RIGHTS

THE WARRANTY COMMENCES FROM THE DATE OF PURCHASE YOU MUST
RETAIN YOUR RECEIPT OR INVOICE AS PROOF OF PURCHASE.
THIS EXTENDED WARRANTY SPECIFICALLY EXCLUDES SOFT REFRACTORY
COMPONENTS, ANY BULB AND ANY BATTERIES.

Terms and Conditions
1.  The appliance must be installed by a Gas safe registered person.
2.  The appliance must be used in accordance with the users instructions.
3.  The appliance must be serviced annually by a Gas Safe registered person.
4.  The service log must be correctly filled out and the record of annual services must be up to date and supported

by receipts in each case.

5.  This warranty is not transferable and relates to the original installation only.
6.  The Registration Form must be correctly filled out and returned.
7.  The appliance has not been subjected to misuse or accident or been modified or repaired by any person other

than the authorised employee or authorised representative of Charlton and Jenrick Ltd.

8. The registration form must be returned within 3 months of purchase.

PARAGON HELPDESK NUMBER 353 4854325

«
...
17
18
19
20
21
...
»

Содержание Rosmore





























Отзывы:

Нет отзывов