UBTECH Jimu, Инструкция по эксплуатации

Страница: 28 / 28

26
Q: The app displays abnormal temperatures.
A: Please allow the robot to rest for half an hour, then you may continue to use it.
Q: The app displays low voltage.
A: Please recharge the robot, and do not use the robot while it is recharging.
Q: The app displays no connection.
A: If it still reports an error after re-assembly and/or changing the cables, then the servo motor communication may have malfunctioned. Please
replace the servo motor.
Q: The app displays the quantity of the servo motors do not match when connecting via Bluetooth.
A: 1. When the app is connecting via Bluetooth, a network topological graph will be displayed. Please check if there are any errors prompted on
this graph.
2. Check whether the built robot matches the connected o
ffi cial model.
3. Check if there are any connection errors according to the reported errors on the topological graph. If there are errors reported about several
servo motors, please check if the cables are properly connected to the ports on the main control box.
Q: The app displays duplicate Servo IDs.
A: 1. Check if you have bought multiple hardware products and the same ID has been used more than once. You can just find the ID and replace it.
2. Check if you have used software to change the ID. We do not recommend changing it carelessly. Please make sure to change the ID sticker
after you have modified the ID in order to avoid confusion.
Q: The app displays that the servo motor version or the motherboard version is inconsistent.
A: The app has an automatic update feature. If the information is prompted, please ensure the device is connected to the Internet.
Q: The app failed to load the model.
A: 1. Try switching the type of Internet connection, for example switching to 4G or Wi-Fi.
2. It could be a server error. We suggest trying it again at a later time.