Ublox ZED-F9K Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 105

background image

ZED-F9K - Integration manual

3 Receiver functionality

This section describes the ZED-F9K operational features and their conﬁguration.

3.1 Receiver conﬁguration

The  ZED-F9K  is  fully  conﬁgurable  with  UBX  conﬁguration  interface  keys.  The  conﬁguration
database  in  the  receiver's  RAM  holds  the  current  conﬁguration,  which  is  used  by  the  receiver
at  run-time.  It  is  constructed  on  start-up  of  the  receiver  from  several  sources  of  conﬁguration.
The  conﬁguration  interface  and  the  available  keys  are  described  fully  in  the  ZED-F9K  Interface
description [

].

A conﬁguration setting stored in RAM remains eﬀective until power-down or reset. If stored in
BBR (battery-backed RAM), the setting will be used as long as the backup battery supply remains.
Conﬁguration settings can be saved permanently in ﬂash memory.

CAUTION

The conﬁguration interface has changed from earlier u-blox positioning receivers.

Legacy messages are deprecated, and will not be supported in future ﬁrmware releases.
Users are advised to adopt the conﬁguration interface described in this document. See
legacy UBX-CFG message ﬁelds reference section in the ZED-F9K Interface description [

].

Conﬁguration interface settings are held in a database consisting of separate conﬁguration items.
An item is made up of a pair consisting of a key ID and a value. Related items are grouped together
and identiﬁed under a common group name: CFG-GROUP-*; a convention used in u-center and
within this document. Within u-center, a conﬁguration group is identiﬁed as "Group name" and the
conﬁguration item is identiﬁed as the "item name" under the "Generation 9 Conﬁguration View" -
"Advanced Conﬁguration" view.

The UBX messages available to change or poll the conﬁgurations are the UBX-CFG-VALSET, UBX-
CFG-VALGET, and UBX-CFG-VALDEL messages. For more information about these messages and
the conﬁguration keys see the conﬁguration interface section in the ZED-F9K Interface description
[

].

3.1.1 Changing the receiver conﬁguration

The conﬁguration messages UBX-CFG-VALSET, UBX-CFG-VALGET and UBX-CFG-VALDEL, will
result in a UBX-ACK-ACK or a UBX-ACK-NAK response.

3.1.2 Default GNSS conﬁguration

The ZED-F9K default GNSS conﬁguration is set as follows:

• GPS: L1C/A, L2C
• GLONASS: L1OF, L2OF
• Galileo: E1B/C, E5b
• BeiDou: B1I, B2I
• QZSS: L1C/A, L2C

UBX-20046189 - R01

3 Receiver functionality

Page 9 of 105

C1-Public

Early production information

«
...
7
8
9
10
11
...
»

Содержание ZED-F9K










































































































Отзывы:

Нет отзывов

Похожие инструкции для ZED-F9K

Бренд: D-Link Страницы: 113

Бренд: D-Link Страницы: 146

Бренд: GE Страницы: 8

Бренд: SYR Страницы: 2

Бренд: IBM Страницы: 214

Бренд: STIEBEL ELTRON Страницы: 44

Home easy HE-440

Бренд: CH Byron Страницы: 2

Бренд: RTI Страницы: 2

Бренд: Nautronic Страницы: 6

Бренд: Redbusbar Страницы: 12

Entelli-Switch 250

Бренд: GE Страницы: 32

Бренд: Daikin Страницы: 150

McDonnell & Miller PSE-80 Series

Бренд: Xylem Страницы: 8

Бренд: Danfoss Страницы: 20

Automation PC 810

Бренд: B&R Страницы: 428

Бренд: Potter Страницы: 4

Vesta Building Controller

Бренд: Vestamatic Страницы: 38

Бренд: Allen-Bradley Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды