Ublox XPLR-AOA-1, Руководство пользователя

Страница: 11 / 27

XPLR-AOA-1 and XPLR-AOA-2 explorer kits - User guide
UBX-21004616 - R10 XPLR-AOA anchor nodes and tags Page 11 of 27
C1 - Public
4.3.2 Connectors
4.3.2.1 UART
The UART connection must be configured for USB connection with jumpers connecting pins 3 to 5
and 4 to 6 on connector J5, as shown in
Figure 8 .
Figure 8: Jumper settings for UART connection over USB
4.3.2.2 Buttons
The C211 board has three buttons on one edge of the board:
• RESET: Resets (reboot) the board
• SW1: Initiates factory reset of the board settings: Hold down SW1 during board reset and hold for
10 seconds to trigger a factory reset.
• SW2: Enters the software download mode: Hold down SW2 during board reset to enter the
download mode. See also Flashing .
4.3.2.3 Arduino interface
C211 boards contain an Arduino compatible interface that can be used to connect, for example, an
ODIN-W2 EVK to enable wireless communication over UDP. For further information about UDP, see
the u-connectXpress software user guide
[17] .