TOBY-L2 and MPCI-L2 series - System Integration Manual
UBX-13004618 - R07
Advance Information
Approvals
Page 145 of 158
4.3
R&TTED and European Conformance CE mark
The modules have been evaluated against the essential requirements of the 1999/5/EC Directive.
In order to satisfy the essential requirements of the 1999/5/EC Directive, the modules are compliant with the
following standards:
Radio Frequency spectrum use (R&TTE art. 3.2):
o
EN 301 511 V9.0.2
o
EN 301 908-1 V6.2.1
o
EN 301 908-2 V6.2.1
o
EN 301 908-13 (V5.2.1)
Electromagnetic Compatibility (R&TTE art. 3.1b):
o
EN 301 489-1 V1.9.2
o
EN 301 489-7 V1.3.1
o
EN 301 489-24 V1.5.1
Health and Safety (R&TTE art. 3.1a)
o
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
o
EN 62311:2008
Radiofrequency radiation exposure Information: this equipment complies with radiation
exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions.
This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the body of the user or nearby persons. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter except as authorized
in the certification of the product.
The conformity assessment procedure for the modules, referred to in Article 10 and detailed in Annex IV of
Directive 1999/5/EC, has been followed with the involvement of the following Notified Body number: 1588
Thus, the following marking is included in the product:
1588
