MAX-7 / NEO-7 - Hardware Integration Manual
UBX-13003704
-
R09
Production Information
Related
documents
Page
51 of 52
Related documents
[1]
NEO-7 Data Sheet, Docu. No GPS.G7-HW-11004
[2]
MAX-7 Data Sheet, Docu. No GPS.G7-HW-12012
[3]
u-blox 7 Receiver Description including Protocol Specification, Docu. No GPS.G7-SW-12001
[4]
u-blox 7 Firmware Version 1.0 Release Note, Docu. No GPS.G7-SW-12003
[5]
GPS Antenna Application Note, Docu. No GPS-X-08014
[6]
UBX-G7020 Data Sheet, Docu. No GPS.G7-HW-10002
[7]
GPS Compendium, Docu. No GPS-X-02007
[8]
I
2
C-bus specification, Rev. 5, Oct 2012, http://www.nxp.com/documents/other/UM10204_v5.pdf
[9]
GPS Implementation and Aiding Features in u-blox cellular modules, Docu. No GSM.G1-CS-09007
For regular updates to u-blox documentation and to receive product change notifications, please register
on our homepage (http://www.u-blox.com).
Revision history
Revision
Date
Name
Status / Comments
-
04-Sep-2012
jfur
Initial draft
1
20-Dec-2012
jfur
MAX-7W added, Revision Chapter 3.4 Antenna supervision; MAX-7C: Higher backup
current, new Figure 42 and 43; DC-bloc removed from Figure 21 and Figure 22
2
11-Feb-2013
jfur
NEO-7P added, Electrical Programmable Fuse (eFuse) added
3
22-Apr-2013
jfur
Stencil thickness 150 um (Figure 9, 12, 13); Table 15: (MAX-7W: V_ANT ) added;
Added section 7.1.1 Population of Modules
4
17-Jun-2013
jfur
ANT_ON description; Recommended GPS & GLONASS active antenna updated
Last revision with old document number GPS.G7-HW-11006
R06
30-Sep-2013
jfur
Antenna open circuit detection (OCD) for MAX-7W in section 3.4.3.3
R07
20-Jan-2014
jfur
Document status changed to Early Production Information.
LEA-7N removed; Figure 18, Figure 26 and Figure 30 updated.
R08
20-May-2014
jfur
Production Information; Appendix A.2 added: Design-in recommendations in combination
with cellular operation
R09
27-Sep-2017
msul
Added information on RED DoC in European Union regulatory compliance (page 2), added
Intended use statement in section7.3.6 Electromagnetic interference (EMI), updated legal
statement in cover page and added Documentation feedback e-mail address in contacts
page.
