Ublox EVK-NORA-W101, Руководство пользователя

Страница: 17 / 22

EVK-NORA-W1 - User guide
UBX-22002764 - R02 Hardware description Page 17 of 22
C1-Public
3.11 Jumpers
The EVK-NORA-W10 printed circuit board (PCB) supports several solder-bridge jumpers for
configuring GPIO functions. Most jumpers disconnect on-board components from the GPIO nets and
subsequently eliminate interference generated by any external circuits attached to the I/O sockets
(female). The physical location of the jumpers is shown in
Figure 17 .
Figure 17: PCB jumper positions
The physical location of some GPIO jumpers, test points, and other components are shown on the
bottom side of the PCB, as shown in
Figure 18 .
Figure 18: Legend for GPIO jumpers and test points (bottom view)
Pin-1 indicator