EVK-M8U User Guide
UBX-15023994 - R01
Advance Information
Test drives
Page 15 of 26
5
Test drives
Before testing can be done, make sure that the initialization and calibration have been completed
according to chapter 4.
We recommend recording and archiving the data of your test drives. You can enable additional debug messages
by clicking the Debug button, and then clicking the Record button (see Figure 7). When prompted to poll for
configuration, click “Yes” (see Figure 8).
Figure 7: The Debug and Record buttons are used for extra messages and debugging / post-analysis
Figure 8: Allow polling and storing of the receiver configuration into log file
