UBX-21008123 - R02
Quick start guide
Page 5 of 42
C1-Public
1
Quick start guide
EVK-ANNA-B4 software and documentation is available at
1.1
Installing s-center evaluation software
s-center is a powerful and easy-to-use tool for evaluating, configuring, and testing u-blox short range
modules. Running on Windows 10 operating systems, the software allows end users to assess and
configure u-blox short range modules using the EVK.
Follow the procedure outlined below to download and install the s-center software and
documentation. The software can be downloaded from the u-blox
available free of charge.
1.
Download the latest s-center software to your computer.
2.
Open the s-center setup installer to install the software.
3.
Select Launch button in the installer or open the application from the Windows Start button.
1.2
Installing J-Link drivers
Follow the procedure outlined below to install the J-Link drivers needed for programming the module.
1.
Connect the EVK-ANNA-B4 board to your PC using the USB cable provided with the product.
2.
Verify that the USB drivers are installed successfully. If the drivers do not install automatically,
see also
Evaluation board setup
.
3.
Once the drivers are installed, a COM port is enabled in Windows. Use the Windows Device
Manager to view the COM port number for the USB serial port.
4.
Start s-center to communicate with the module.
For EVK-ANNA-B4x2U (with external antenna), attach the antenna to the antenna cable and connect
the antenna cable to the U.FL connector.
Содержание EVK-ANNA-B4
Страница 34: ...UBX 21008123 R02 Appendix Page 34 of 42 C1 Public Appendix A Schematics...
Страница 37: ...UBX 21008123 R02 Appendix Page 37 of 42 C1 Public Pages 2 and 6 of the schematic are intentionally omitted...
Страница 39: ...UBX 21008123 R02 Appendix Page 39 of 42 C1 Public Figure 23 ANNA B4 assembly drawing bottom view...