BMD-34x-EVAL User Guide
Rev 2.0
15
6.10
QSPI
A 64Mbit Quad SPI (MX25R6435F) flash is available on the BMD-34x-EVAL. This memory may be used
for execute in place (XIP) directly from the flash as well as general data storage.
Figure 13
–
Quad SPI Flash
6.11
GPIO Jumpers
There are many solder bridge jumpers on the board available to allow for configurability of the GPIO.
Most solder jumpers are used to remove on-
board components from the module’s GPIO nets,
should
they interfere with external circuitry added on the I/O headers. All GPIOs are directly connected to the
I/O Headers by default, except P0.00 & P0.01 (
), and P0.17 &
P0.20 through P0.23 (
). These are disconnected from the I/O headers as they would interfere with
the default functions. The GPIO jumpers are shown on the bottom side of the BMD-34x-EVAL.
Figure 14
–
GPIO Jumpers
Содержание BMD-340-EVAL
Страница 1: ...Rev 2 0 BMD 34x EVAL User Guide ...
