Ublox ANNA-B4 Series Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 74

Ublox ANNA-B4 Series Скачать руководство пользователя страница 38

ANNA-B4 series - System integration manual

UBX-21000517 - R03

Contents

Page 38 of 74

C1-Public

5

u-connectXpress software

ANNA-B412 modules come pre-flashed with u-connectXpress and a secure bootloader software.

To ensure that the module only boots with the original u-blox software, the secure bootloader initiates
a signature verification on the flashed software binary before it is booted.

ANNA-B412 u-connectXpress software can be re-flashed over the UART interface, using AT
commands or the s-center client software available from the u-blox website.

5.1

Flashing ANNA-B412 u-connectXpress software

New versions of ANNA-B41 u-connectXpress software can be flashed to the module over the UART
interface. See also

Updating software with s-center

and

Updating software with AT commands

The following pins should be made available as either headers or test points to flash the module:

•

UART

(RX, TX)

•

RESET_N

•

SWITCH_1

and

SWITCH_2

Updating over UART

ANNA-B41 u-connectXpress software includes the bootloader for flashing ANNA-B4 over the UART
interface. The software is available for download at

Distributed in a single ZIP container, the software includes two separate binary files and one JSON
file that includes the software label, software description, file name, version, flash address, image
size, image id, file permissions, and signature file reference for the SoftDevice and
ConnectivitySoftware applications:

•

Java Script Object Notation:

ANNA-B41X-CF-<version>.json

. For example:

ANNA-B41X-CF-1.0.json

•

ConnectivitySoftware:

ANNA-B41X-SW-x.y.z-<build>.bin

. For example:

ANNA-B41X-SW-1.0.0-001.bin

•

SoftDevice:

ANNA-S140-SD-a.b.c.bin

. For example,

ANNA-S140-SD-7.2.0.bin

Signature files (

ANNA-B41X-SI-x.x.x-xxx.txt

and

ANNA-S140-SI-x.x.x-xxx.txt

) for each of the

binaries are also included in the container.

5.1.1.1

Updating software with s-center

⚠

To update ANNA-B41 u-connectXpress requires s-center software version 6.0.0 or later. See also
the s-center user guide

Procedure

1.

Connect the supplied serial cable from the J8 connector on EVK-ANNA-B41 to the USB port your
computer. For further information about setting up EVK-ANNA-B41, see also EVK-ANNA-B4
user guide

2.

Download the latest version of the s-center and u-connectXpress software from u-blox

3.

Start s-center and choose "USB Serial Port (COMx)" in the drop-

down “COM Port” menu. All other

dialog settings are set to default.

4.

Select

Open Port

. A series of AT commands and response are shown in the “Console Window”.

«
...
36
37
38
39
40
...
»

Содержание ANNA-B4 Series











































































Отзывы:

Нет отзывов