ANNA-B112 - System integration manual
UBX-18009821 - R09
Qualifications and approvals
Page 52 of 66
C1-Public
5
Qualifications and approvals
For regulatory information, see the ANNA-B1 series Datasheet [2].
6
Product testing
u-blox in-series production test
u-blox focuses on high quality for its products. All units produced are fully tested automatically in
production line. Stringent quality control process has been implemented in the production line.
Defective units are analyzed in detail to improve the production quality.
This is achieved with automatic test equipment (ATE) in production line, which logs all production and
measurement data. A detailed test report for each unit can be generated from the system. Figure
2929 illustrates typical automatic test equipment (ATE) in a production line.
The following tests are performed as part of the production tests:
•
Digital self-test (software download, MAC address programming)
•
Measurement of currents
•
Functional tests
•
Digital I/O tests
•
Measurement of RF characteristics in all supported bands (such as receiver sensitivity,
transmitter power levels and so on.)
Figure 29: Automatic test equipment for module test
