Quick Start -
self-powered iTRV
LED flash pattern
green flash = Successful pairing
3 x flash = Pairing failed
Installation and reference run
Press the push button 1 or 2 ; iTRV adjusts the min
and max positions. Then enters normal operation.
Pairing-mode
Press the push button 1 or 2 for 5s. You may have to
repeat this step.
Manual Teach-in
Set room controller to pairing mode.
Check the user guide of the room controller.
Additional things to know
•
Connection nut M30 x 1.5 ; adapters are available for
many other valve types.
•
Valve should be working freely
•
EnOcean protocol A5-20-01
•
Every 10 min, the iTRV conects to the room
controller, requesting an update to the valve position
or the set temperature. The iTRV then moves the
valve to the specified position.
•
Summer mode : Radio communication interval
increased from 10 min to 8 hours.
•
To remove the valve, press the push button 1 or 2 for
5s (mind the key lock) and wait until the motor stops.
The loosen the coupling nut.
phone : +33 (0)3 59 61 02 41
e-mail : [email protected]
www.ubiwizz.com
1.
Room controller
EnOcean EEP A5-20-01
2.
3.
During the following 10 min the
iTRV works at a 10s intervals.
Non-installed iTRVs return into
mounting position.
After one hour, the push
buttons lock automatically.
Unlock by pressing button 1
and 2 at once for 10s.
DR-MICITR
V004-03
NFC Tag (Quickmove)
Connection nut
M30 x 1.5
QR Code for
Quickmove
Serial number
EnOcean radio ID
Buttons
Ambient tp sensor
Button 1 and 2
LED
