Reset Button
USP RPS LED (Ports 1 - 6)
USP Connect DC Output (Ports 1 - 6)
Power Port
The RJ45 port supports a 10/100/1000 Ethernet connection. Set to DHCP
Client by default.
Resets to factory defaults. The device should be running after bootup is
complete. Press and hold the Reset button for about 10 seconds until the
display indicates that the device has reset itself. After a few seconds, the LED
will turn off, and the device will automatically reboot.
The LED lights up blue when there is an active power connection.
Connect the included USP Cable to a UniFi device with a USP Connect DC
input. (Additional USP cables are sold separately as model USP-Cable.)
Connect the included Power Cord to the Power port.
Installation Requirements
•
Phillips screwdriver
•
Standard-sized, 19" wide rack with a minimum of 1U height available
•
For indoor applications, use Category 5 (or above) UTP cabling approved for
indoor use.
•
For outdoor applications, shielded Category 5 (or above) cabling should be
used for all wired Ethernet connections and should be grounded through the AC
ground of the power supply.
We recommend that you protect your networks from harmful outdoor
environments and destructive ESD events with industrial-grade, shielded
Ethernet cable from Ubiquiti. For more details, visit:
Note:
Although the cabling can be located outdoors, the USP-RPS itself
should be housed inside a protective enclosure.
Hardware Installation
1.
USP-RPS Quick Start Guide
USP-RPS Quick Start Guide
https://dl.ui.com/qsg/USP-RPS/USP-RPS_EN.html
3 of 12
31/03/2022, 16:13
