4
UniFi
™
AP-AC Quick Start Guide
Ports
MAIN
SECONDARY
Reset
This device complies with Part 15 of FCC rules.
Operation is subject to the following 2 conditions:
1) this device may not cause harmful interference
and, 2) this device must accept any inter ference
received, including inter ference that may cause
undesired operation.
FCC ID: SWX-UAPAC I C : 6 5 4 5 A - U A P A C
0560
M / N: U A P-AC 48V 0.5A POE
A P
A C
|
Main Port
Secondary Port
Reset Button
Cable Feed Plug
Locking
Notch
Locking
Clip
Mounting Bracket
Main
The Main port is a Gigabit Ethernet port used to connect
the power and should be connected to the LAN and DHCP server.
Power can be provided by any of the following:
• PoE GigE Adapter (included)
• PoE+ 802.3at compliant switch
• Ubiquiti Networks TOUGHSwitch PRO, model TS-8-PRO
Secondary
The Secondary port is a Gigabit Ethernet port used for
bridging.
Reset
The Reset button serves two functions:
•
Restart
It will restart the device when you press and release it
quickly.
•
Restore Factory Defaults
When you press and hold it for more
then 5 seconds, it will restore the device to the factory default
settings.
Locking Clip
During installation, the Locking Clip on the Mounting
Bracket locks into the Locking Notch on the UniFi AP to help
prevent easy removal of the UniFi AP.
Cable Feed Plug
If your Ethernet cable feeds along the mounting
surface, remove the Cable Feed Plug.
