Hardware Installation
The
UAP-AC-M-PRO
includes hardware for mounting on a
pole or mast. Alternatively, it can be installed on a wall using
additional fastening hardware.
Pole Mount
1. Insert two Carriage Bolts into each Pole Clamp and attach a
Flange Nut on each bolt.
Note:
The mounting assembly can accommodate a
Ø 38 - 76 mm pole.
2. Remove the Mounting Bracket from the back of the UniFi AP
by depressing the two snap pins.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]