*640-00241-05*
640-00241-05
Powering the UniFi AP
Power the UniFi AP with the included Power Adapter or an
802.3af PoE switch.
Powering with a PoE Adapter
1. Connect the Ethernet cable from the UniFi AP to the POE
port of the Gigabit PoE adapter.
2. (Optional for non-mesh setup) Connect an Ethernet cable
from your LAN to the LAN port of the Gigabit PoE adapter.
3. Connect the Power Cord to the adapter, and then plug the
Power Cord into a power outlet.
Mounting the PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place
the bracket at the desired location, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket
using two fasteners (not included).
3. Align the slots on the adapter with the tabs of the PoE
Mounting Bracket, and then slide the adapter down.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]