manualshive.com logo in svg
background image

Installer Compliance Responsibility

Devices must be professionally installed and it is the 
professional installer's responsibility to make sure the device is 
operated within local country regulatory requirements.

The Output Power field is provided to the professional installer 
to assist in meeting regulatory requirements.

Specifications

NBE-5AC-19

Dimensions (Mount Included)

189 x 189 x 125 mm 

(7.44 x 7.44 x 4.92")

Weight (Mount Included)

530 g 

(1.17 lb)

Operating Frequency

Worldwide: 5150 - 5875 MHz 

USA: 5725 - 5850 MHz

Gain

19 dBi

Networking Interface

(1) 10/100/1000 Ethernet Port

Enclosure

Outdoor UV Stabilized Plastic

Max. Power Consumption

8W

Power Supply

24V, 0.5A Gigabit PoE Adapter (Included)

Power Method

Passive PoE (Pairs 4, 5+; 7, 8 Return)

Wind Loading

45.4 N @ 200 km/h

(10.2 lbf @ 125 mph)

Wind Survivability

200 km/h

(125 mph)

Certifications

CE, FCC, IC

Mounting

Pole-Mount (Kit Included) 

Wall-Mount (Not Included)

ESD/EMP Protection

± 24kV Contact/Air

Operating Temperature

-40 to 80° C

(-40 to 176° F)

Operating Humidity

5 to 95% Noncondensing

Salt Fog Test

IEC 68-2-11 (ASTM B117), 

Equivalent: MIL-STD-810 G Method 509.5

Vibration Test

IEC 68-2-6

Temperature Shock Test

IEC 68-2-14

UV Test

IEC 68-2-5 at 40° C (104° F) 

Equivalent: ETS 300 019-1-4

Wind-Driven Rain Test

ETS 300 019-1-4 

Equivalent: MIL-STD-810 G Method 506.5

Safety Notices

1.  Read, follow, and keep these instructions.
2.  Heed all warnings.
3.  Only use attachments/accessories specified by the manufacturer.

WARNING:

 Do not use this product in location that can 

be submerged by water. 

WARNING:

 Avoid using this product during an electrical 

storm. There may be a remote risk of electric shock from 
lightning. 

Electrical Safety Information

1.  Compliance is required with respect to voltage, frequency, and current 

requirements indicated on the manufacturer’s label. Connection to a 
different power source than those specified may result in improper 
operation, damage to the equipment or pose a fire hazard if the 
limitations are not followed.

2.  There are no operator serviceable parts inside this equipment. Service 

should be provided only by a qualified service technician.

3.  This equipment is provided with a detachable power cord which has 

an integral safety ground wire intended for connection to a grounded 
safety outlet.
a.  Do not substitute the power cord with one that is not the provided 

approved type. Never use an adapter plug to connect to a 2-wire 
outlet as this will defeat the continuity of the grounding wire. 

b.  The equipment requires the use of the ground wire as a part of the 

safety certification, modification or misuse can provide a shock 
hazard that can result in serious injury or death.

c.  Contact a qualified electrician or the manufacturer if there 

are questions about the installation prior to connecting the 
equipment.

d.  Protective earthing is provided by Listed AC adapter. Building 

installation shall provide appropriate short-circuit backup 
protection.

e.  Protective bonding must be installed in accordance with local 

national wiring rules and regulations.

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the 
product(s) furnished hereunder (the “Product(s)”) shall be free from defects 
in material and workmanship for a period of one (1) year from the date 
of shipment by UBIQUITI NETWORKS under normal use and operation. 
UBIQUITI NETWORKS’ sole and exclusive obligation and liability under 
the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, 
to repair or replace any Product that fails to conform to the above 
warranty during the above warranty period. The expense of removal and 
reinstallation of any Product is not included in this warranty. The warranty 
period of any repaired or replaced Product shall not extend beyond its 
original term. 

Warranty Conditions

The above warranty does not apply if the Product:
(I) 

has been modified and/or altered, or an addition made thereto, 
except by Ubiquiti Networks, or Ubiquiti Networks’ authorized 
representatives, or as approved by Ubiquiti Networks in writing;

(II) 

has been painted, rebranded or physically modified in any way;

(III) 

has been damaged due to errors or defects in cabling;

(IV) 

has been subjected to misuse, abuse, negligence, abnormal 
physical, electromagnetic or electrical stress, including lightning 
strikes, or accident;

(V) 

has been damaged or impaired as a result of using third party 
firmware;

(VI) 

has no original Ubiquiti MAC label, or is missing any other original 
Ubiquiti label(s); or

(VII) 

has not been received by Ubiquiti within 30 days of issuance of 
the RMA.

In addition, the above warranty shall apply only if: the product has been 
properly installed and used at all times in accordance, and in all material 
respects, with the applicable Product documentation; all Ethernet cabling 
runs use CAT5 (or above), and for outdoor installations, shielded Ethernet 
cabling is used, and for indoor installations, indoor cabling requirements 
are followed.

Returns

No Products will be accepted for replacement or repair without obtaining 
a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS 
during the warranty period, and the Products being received at UBIQUITI 
NETWORKS’ facility freight prepaid in accordance with the RMA process of 
UBIQUITI NETWORKS. Products returned without an RMA number will not 
be processed and will be returned freight collect or subject to disposal. 
Information on the RMA process and obtaining an RMA number can be 
found at: www.ubnt.com/support/warranty.

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI 
NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, 
SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM 
AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, 
EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, 
REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, 
ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, 
SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS 
FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY 
WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR 
TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. 
BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR 
ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE 
TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING 
THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE 
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS 
AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS 
FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD 
PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, 
DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT 
CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY 
OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant 
that the operation of the Products will be error-free or that operation will 
be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible 
for damages or claims of any nature or description relating to system 
performance, including coverage, buyer’s selection of products (including 
the Products) for buyer’s application and/or failure of products (including 
the Products) to meet government or regulatory requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL 
UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR 
DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES 
(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING 
OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE 
PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER 
LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES. 

Note

Some countries, states and provinces do not allow exclusions of implied 
warranties or conditions, so the above exclusion may not apply to you. 
You may have other rights that vary from country to country, state to 
state, or province to province. Some countries, states and provinces do not 
allow the exclusion or limitation of liability for incidental or consequential 
damages, so the above limitation may not apply to you. EXCEPT TO 
THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO 
NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE 
MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY 
SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations 
Convention on Contracts for the International Sale of Goods shall not apply 
to any transactions regarding the sale of the Products.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible 
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to 
the following two conditions.
1.  This device may not cause harmful interference, and
2.  This device must accept any interference received, including 

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.
Operations of this equipment in a residential area is likely to cause 
harmful interference in which case the user will be required to correct the 
interference at his own expense.

This radio transmitter (FCC: SWX-NBEAC) has been approved by FCC 
to operate with the antenna types listed below with the maximum 
permissible gain and required antenna impedance for each antenna type 
indicated. Antenna types not included in this list, having a gain greater 
than the maximum gain indicated for that type, are strictly prohibited for 
use with this device.
•  Integrated antenna, gain: 17.6 or 19 dBi

Industry Canada

CAN ICES-3(B)/NMB-3(B)

To reduce potential radio interference to other users, the antenna 
type and its gain should be so chosen that the equivalent isotropically 
radiated power (e.i.r.p.) is not more than that permitted for successful 
communication.
This device complies with Industry Canada licence-exempt RSS standard(s). 
Operation is subject to the following two conditions: 
1.  This device may not cause interference, and 
2.  This device must accept any interference, including interference that 

may cause undesired operation of the device.

This radio transmitter (IC: 6545A-NBEAC) has been approved by Industry 
Canada to operate with the antenna types listed below with the maximum 
permissible gain and required antenna impedance for each antenna type 
indicated. Antenna types not included in this list, having a gain greater 
than the maximum gain indicated for that type, are strictly prohibited for 
use with this device.
•  Integrated antenna, gain: 17.6 or 19 dBi

CAN ICES-3(B)/NMB-3(B)

Pour réduire le risque d’interférence aux autres utilisateurs, le type 
d’antenne et son gain doivent être choisies de façon que la puissance 
isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire 
pour une communication réussie. 
Cet appareil est conforme à la norme RSS Industrie Canada exempts de 
licence norme(s). Son fonctionnement est soumis aux deux conditions 
suivantes:
1.  Cet appareil ne peut pas provoquer d’interférences et 
2.  Cet appareil doit accepter toute interférence, y compris les 

interférences qui peuvent causer un mauvais fonctionnement du 
dispositif.

Cet émetteur radio (IC: 6545A-NBEAC) a été approuvée par Industrie 
Canada pour l’exploitation avec l’antenne types énumérés ci-dessous avec 
le gain maximal admissible et requis l’impédance de l’antenne pour chaque 
type d’antenne indiqué. Types d’antenne non inclus dans cette liste, ayant 
un gain supérieur au gain maximal indiqué pour ce type, sont strictement 
interdits pour une utilisation avec cet appareil. Immédiatement suite à la 
remarque, le fabricant doit fournir une liste de tous les types d’antenne 
approuvé pour une utilisation avec l’émetteur, ce qui indique le gain 
maximal d’antenne permis (en dBi) et requis d’impédance pour chacun.
•  Antenne intégré, 17.6 ou 19 dBi

RF Exposure Warning

The antennas used for this transmitter must be installed to provide a 
separation distance of at least 48 cm from all persons and must not be 
located or operating in conjunction with any other antenna or transmitter.
Les antennes utilisées pour ce transmetteur doivent être installé en 
considérant une distance de séparation de toute personnes d’au moins 
48 cm et ne doivent pas être localisé ou utilisé en conflit avec tout autre 
antenne ou transmetteur.

CE Marking

CE marking on this product represents the product is in compliance with all 
directives that are applicable to it.

Alert Sign (!) Follows CE Marking

Alert sign must be indicated if a restriction on use applied to the product 
and it must follow the CE marking.

RoHS/WEEE Compliance Statement

English

European Directive 2002/96/EC requires that the equipment bearing 
this symbol on the product and/or its packaging must not be disposed 
of with unsorted municipal waste. The symbol indicates that this 
product should be disposed of separately from regular household waste 
streams. It is your responsibility to dispose of this and other electric and 
electronic equipment via designated collection facilities appointed by the 
government or local authorities. Correct disposal and recycling will help 
prevent potential negative consequences to the environment and human 
health. For more detailed information about the disposal of your old 
equipment, please contact your local authorities, waste disposal service, or 
the shop where you purchased the product.

Deutsch

Die Europäische Richtlinie 2002/96/EC verlangt, dass technische 
Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem 
Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall 
entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt 
von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es 
liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische 
und elektronische Geräte über die dafür zuständigen und von der 
Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu 
entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, 
potentielle negative Folgen für Umwelt und die menschliche Gesundheit 
zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer 
Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder 
städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das 
Produkt erworben haben.

Español

La Directiva 2002/96/CE de la UE exige que los equipos que lleven este 
símbolo en el propio aparato y/o en su embalaje no deben eliminarse 
junto con otros residuos urbanos no seleccionados. El símbolo indica 
que el producto en cuestión debe separarse de los residuos domésticos 
convencionales con vistas a su eliminación. Es responsabilidad suya 
desechar este y cualesquiera otros aparatos eléctricos y electrónicos a 
través de los puntos de recogida que ponen a su disposición el gobierno y 
las autoridades locales. Al desechar y reciclar correctamente estos aparatos 
estará contribuyendo a evitar posibles consecuencias negativas para el 
medio ambiente y la salud de las personas. Si desea obtener información 
más detallada sobre la eliminación segura de su aparato usado, consulte a 
las autoridades locales, al servicio de recogida y eliminación de residuos de 
su zona o pregunte en la tienda donde adquirió el producto.

Français

La directive européenne 2002/96/CE exige que l’équipement sur lequel 
est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté 
avec les autres ordures ménagères. Ce symbole indique que le produit 
doit être éliminé dans un circuit distinct de celui pour les déchets des 
ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout 
autre matériel électrique ou électronique par les moyens de collecte 
indiqués par le gouvernement et les pouvoirs publics des collectivités 
territoriales. L’élimination et le recyclage en bonne et due forme ont pour 
but de lutter contre l’impact néfaste potentiel de ce type de produits 
sur l’environnement et la santé publique. Pour plus d’informations sur le 
mode d’élimination de votre ancien équipement, veuillez prendre contact 
avec les pouvoirs publics locaux, le service de traitement des déchets, ou 
l’endroit où vous avez acheté le produit.

Italiano

La direttiva europea 2002/96/EC richiede che le apparecchiature 
contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non 
siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica 
che questo prodotto non deve essere smaltito insieme ai normali rifiuti 
domestici. È responsabilità del proprietario smaltire sia questi prodotti sia 
le altre apparecchiature elettriche ed elettroniche mediante le specifiche 
strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il 
corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze 
potenzialmente negative per l’ambiente e per la salute dell’essere umano. 
Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie 
apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti 
pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel 
quale avete acquistato il prodotto.

Declaration of Conformity

Česky  

[Czech]

UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI 

NETWORKS zařízení, je ve shod se základními požadavky a dalšími 

příslušnými ustanoveními směrnice 1999/5/ES.

Dansk 

[Danish]

Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI 

NETWORKS enhed, er i overensstemmelse med de væsentlige krav 

og øvrige relevante krav i direktiv 1999/5/EF.

Nederlands 

[Dutch]

Hierbij verklaart UBIQUITI NETWORKS, dat deze UBIQUITI 

NETWORKS apparaat, in overeenstemming is met de essentiële 

eisen en de andere relevante bepalingen van richtlijn 1999/5/EC.

English

Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI 

NETWORKS device, is in compliance with the essential requirements 

and other relevant provisions of Directive 1999/5/EC.

Eesti 

[Estonian]

Käesolevaga UBIQUITI NETWORKS kinnitab, et antud UBIQUITI 

NETWORKS seade, on vastavus olulistele nõuetele ja teistele 

asjakohastele sätetele direktiivi 1999/5/EÜ.

Suomi 

[Finnish]

Täten UBIQUITI NETWORKS vakuuttaa, että tämä UBIQUITI 

NETWORKS laite, on yhdenmukainen olennaisten vaatimusten ja 

muiden sitä koskevien direktiivin 1999/5/EY.

Français 

[French]

Par la présente UBIQUITI NETWORKS déclare que l’appareil 

UBIQUITI NETWORKS, est conforme aux exigences essentielles et 

aux autres dispositions pertinentes de la directive 1999/5/CE.

Deutsch 

[German]

Hiermit erklärt UBIQUITI NETWORKS, dass sich dieses UBIQUITI 

NETWORKS Gerät, in Übereinstimmung mit den grundlegenden 

Anforderungen und den anderen relevanten Vorschriften der 

Richtlinie 1999/5/EG befindet.

Ελληνική 

[Greek]

Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η 

συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις 

βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας 

1995/5/ΕΚ.

Magyar 

[Hungarian]

Ezennel UBIQUITI NETWORKS kijelenti, hogy ez a UBIQUITI 

NETWORKS készülék megfelel az alapvető követelményeknek és 

más vonatkozó 1999/5/EK irányelv rendelkezéseit.

Íslenska 

[Icelandic]

Hér, UBIQUITI NETWORKS, því yfir að þetta UBIQUITI NETWORKS 

tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði 

tilskipun 1999/5/EC.

Italiano 

[Italian]

Con la presente, UBIQUITI NETWORKS, dichiara che questo 

dispositivo UBIQUITI NETWORKS, è conforme ai requisiti essenziali 

ed alle altre disposizioni pertinenti della direttiva 1999/5/CE.

Latviski 

[Latvian]

Ar šo, UBIQUITI NETWORKS, deklarē, ka UBIQUITI NETWORKS 

ierīce, ir saskaņā ar būtiskajām prasībām un citiem attiecīgiem 

noteikumiem Direktīvā 1999/5/EK.

Lietuviškai 

[Lithuanian]

UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS 

įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB 

Direktyvos nuostatas.

©2014-2015 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti 
Networks, the Ubiquiti U logo, the Ubiquiti beam logo, airMAX, airOS, EdgeRouter, 
EdgeSwitch, NanoBeam, TOUGHCable, and TOUGHSwitch are trademarks or 
registered trademarks of Ubiquiti Networks, Inc. in the United States and in other 
countries. All other trademarks are the property of their respective owners.

JL060415

Malti 

[Maltese]

Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz 

UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u 

dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/EC.

Norsk 

[Norwegian]

Herved UBIQUITI NETWORKS, erklærer at denne UBIQUITI 

NETWORKS enheten, er i samsvar med de grunnleggende kravene 

og andre relevante bestemmelser i direktiv 1999/5/EF.

Slovensky 

[Slovak]

Týmto UBIQUITI NETWORKS, prehlasuje, že toto UBIQUITI 

NETWORKS zariadenie, je v súlade so základnými požiadavkami a 

ďalšími relevantnými ustanoveniami smernice 1999/5/ES.

Svenska 

[Swedish]

Härmed UBIQUITI NETWORKS, intygar att denna UBIQUITI 

NETWORKS enhet är i överensstämmelse med de väsentliga 

egenskapskrav och övriga relevanta bestämmelser som framgår av 

direktiv 1999/5/EG.

Español 

[Spanish]

Por medio de la presente UBIQUITI NETWORKS declara que este 

dispositivo UBIQUITI NETWORKS, cumple con los requisitos 

esenciales y cualesquiera otras disposiciones aplicables o exigibles 

de la Directiva 1999/5/CE.

Polski  

[Polish]

Niniejszym, Ubiquiti Networks, oświadcza, że   urządzenie UBIQUITI 

NETWORKS, jest zgodny z zasadniczymi wymaganiami oraz 

pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português 

[Portuguese]

UBIQUITI NETWORKS declara que este dispositivo UBIQUITI 

NETWORKS, está conforme com os requisitos essenciais e outras 

disposições da Directiva 1999/5/CE.

Română 

[Romanian]

Prin prezenta, UBIQUITI NETWORKS declară că acest dispozitiv 

UBIQUITI NETWORKS este în conformitate cu cerințele esențiale și 

alte prevederi relevante ale Directivei 1999/5/CE.

Online Resources

Support 

support.ubnt.com

Community 

community.ubnt.com

Downloads 

downloads.ubnt.com

NanoBeam_NBE-5AC-19_QSG_V08_06-04-15_Foldout.indd   2

6/4/15   2:22 PM

Содержание NanoBeam ac






















Отзывы: