6. A login screen will appear for the mFi Controller
management interface. Enter the Admin Name and
Password that you created and click Login.
Accessing the Configuration Portal
You need to connect to the Configuration Portal to configure
any of the following:
• Access to local mFi Controller on a different IP network
• Wireless network access (Wi-Fi settings)
Note:
If you are not using these configurations, you do
not need to access the Configuration Portal.
The Configuration Portal can be accessed in two ways:
• Connect an Ethernet cable directly from your computer to
the Ethernet Port on the mPower PRO (EU) and configure
your computer with a static IP address.
• Connect an Ethernet cable from your DHCP-enabled LAN to
the Ethernet Port on the mPower PRO (EU).
