Accessing the Configuration Portal
You need to connect to the Configuration Portal to configure
any of the following:
• Access to local mFi Controller on a different IP network
• Wireless network access (Wi-Fi settings)
Note:
If you are not using these configurations, you do
not need to access the Configuration Portal.
The Configuration Portal can be accessed in two ways:
• Connect an Ethernet cable from your computer to the LAN
port on the PoE Adapter and configure your computer with
a static IP address.
• Connect an Ethernet cable from your DHCP-enabled LAN to
the LAN port on the PoE Adapter.
Configuration Portal via Ethernet to Computer
1. Make sure that your computer is connected via Ethernet to
the LAN port on the PoE Adapter.
WARNING:
Do not connect the computer to the port
labeled POE on the PoE Adapter.
2. Configure the Ethernet adapter on your computer with a
static IP address on the 192.168.1.x subnet.
3. Launch your web browser and type http://192.168.1.20 in
the address field. Press enter (PC) or return (Mac).
4. Go to the Configuration Portal Interface Settings section.
