Connecting Power over Ethernet
1. Connect the Ethernet cable from the NanoStation to the
POE
port of the
PoE Adapter.
2. Connect an Ethernet cable from your LAN to the
LAN
port
of the
PoE Adapter.
3. Connect the
Power Cord
to the adapter’s power port.
Connect the other end of the
Power Cord
to a power outlet.
Mounting the PoE Adapter (Optional)
1. Remove the
PoE Mounting Bracket
from the adapter, place
the bracket at the desired location, and mark the two holes.
2. Pre‑drill the holes if necessary, and secure the bracket
using two fasteners (not included).
3. Align the adapter’s slots with the tabs of the
PoE Mounting
Bracket
, and then slide the adapter down.
