Ubiquiti AirRouterHP, Руководство пользователя

Страница: 41 / 61

37
Chapter 7: Advanced Tab AirRouter HP User Guide
Ubiquiti Networks, Inc.
Advanced Ethernet Settings
Enable Autonegotiation
When enabled, the device will
automatically negotiate transmission parameters with the
counterpart, such as speed and duplex. In this process, the
connected devices first share their capabilities and then
choose the fastest transmission mode they both support.
If you want to specify the values manually, disable the
Enable Autonegotiation option and select the values:
•
Link Speed, Mbps Selects the maximum transmission
link speed. There are two options: 10Mbps or 100Mbps.
If running extra long Ethernet cables, a link speed of
10Mbps could help to achieve better stability.
• Enable Full Duplex Selects the duplex mode;
if enabled, the device operates in Full Duplex
(allowing bidirectional communication in both
directions simultaneously). While disabled, the
device operates in Half-Duplex mode (allowing
bidirectional communication in both directions, but not
simultaneously and only in one direction at a time.
Traffic Shaping
Wireless Traffic shaping is dedicated to upstream and
downstream bandwidth control while looking from the
client (connected on the Ethernet interface) perspective.
The traffic can be limited at the AirRouter HP in the upload
and download direction based on a user defined rate limit.
This is layer 3 QoS.
Enable Traffic Shaping This option will enable
bandwidth control on the device.
•
Incoming Traffic Limit Specify the maximum
bandwidth value (in kilobits per second, Kbps) for traffic
passing from the wireless interface to the Ethernet
interface.
• Incoming Traffic Burst Specify the data volume (in
kilobytes) to which the Incoming Traffic Limit will not be
effective afterwards data connection is initiated.
• Outgoing Traffic Limit Specify the maximum
bandwidth value (in kilobits per second, Kbps) for traffic
passing from the Ethernet interface to the wireless
interface.
• Outgoing Traffic Burst Specify the data volume (in
kilobytes) to which the Outgoing Traffic Limit will not be
effective after data connection is initiated.