NanoStationM/locoM Series Quick Start Guide
https://dl.ubnt.com/qsg/NanoStationM_NanoStationlocoM/NanoStationM_NanoStationlocoM_EN.html[1/27/2020 3:06:49 PM]
Power Cord
NanoStationlocoM9
Zip Tie
PoE (24V, 0.5A) with Mounting
Bracket
Power Cord
locoM9
Installation Requirements
Shielded Category 5 (or above) cabling with drain wire should be used for all wired
Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and
destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For
Surge protection should be used for all outdoor installations. We recommend that you use
two Ethernet Surge Protectors, model ETH-SP, one near the NanoStation and the other at
the entry point to the building. The ETH-SP will absorb power surges and safely discharge
them into the ground.
