Ports
Reset
Button
Management
Port
Data
Port
Management Port
10/100/1000 Mbps, secured Ethernet
port for configuration. In-Band Management is enabled by
default in the airFiber Configuration Interface. When In-Band
Management is disabled, the MGMT port is the only port that
can monitor, configure, and/or update firmware. This port can
also be used to provide redundant PoE power.
Reset Button
To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the device is
already powered on.
Data Port
Gigabit PoE port for handling all user traffic and
powering the device.
