Ubiquiti airFiber AF-24-US Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 40

Ubiquiti airFiber AF-24-US Скачать руководство пользователя страница 8

6

airFiber AF-24 Quick Start Guide

Installation Requirements

•  17 mm wrench
•  13 mm socket wrench or driver
•  Clear line of sight between airFiber radios
•  Clear view of the sky for proper GPS operation
•  Mounting location with < 0.5° displacement due to twist and

sway under wind loading

• Mounting point:

• At least 1 meter below the highest point on the structure
• For tower installations, at least 3 meters below the top of the

tower

• Ground wires – min. 8 AWG (10 mm

2

) and max. length: 1 meter.

As a safety precaution, ground the airFiber radios to grounded

masts, poles, towers, or grounding bars.

WARNING:

Failure to properly ground your airFiber

units will void your warranty.

• (Recommended) 2 Outdoor GigE PoE surge protectors

Note:

For guidelines about grounding and lightning

protection, follow your local electrical regulatory codes.

• Outdoor, shielded Category 5e (or above) cabling and shielded

RJ-45 connectors should be used for all wired Ethernet

connections. Category 6 is required for installations with long

cable runs (up to 100 m).
We recommend that you protect your networks from harmful
outdoor environments and destructive ESD events with
industrial-grade, shielded Ethernet cable from Ubiquiti Networks.
For more details, visit www.ubnt.com/toughcable

Installation Overview

We recommend that you configure your paired airFiber radios
before mounting. Below is an overview of the installation with
specific details on the following pages:
• Connect Power over Ethernet to the Data port, and connect an

Ethernet cable between your computer and the Config port.

• Configure device settings in the airFiber Configuration Interface.

«
...
6
7
8
9
10
...
»

Содержание airFiber AF-24-US









































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды