Ubiquiti airFiber AF-11FX, Быстрый старт

Страница: 9 / 47

Management Port
Reset Button
Data Port
VDC IN
TX 0, RX 0
RX 1, TX 1
On Powered On
10/100 Mbps, secured Ethernet port for configuration. In-Band Management is
enabled by default in the airFiber Configuration Interface. When In-Band
Management is disabled, the MGMT port is the only port that can monitor, configure,
and/or update firmware.
To reset to factory defaults, press and hold the Reset button for more than 10
seconds while the device is already powered on.
Gigabit PoE port for handling all user traffic and powering the device.
The terminal block can be used to power the AF-11FX with +50VDC, 1.2A instead of
PoE.
The TX and RX SMA ports for the Chain 0 Low-Band Duplexer or High-Band
Duplexer (SISO and MIMO modes).
The RX and TX SMA ports for the Chain 1 Low-Band Duplexer or High-Band
Duplexer (MIMO mode only). In SISO mode, these unused ports are protected by
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD