manualshive.com logo in svg

Ubiquiti airFiber AF-11FX, Быстрый старт

Поделиться
Скачать
Ubiquiti airFiber AF-11FX Скачать руководство пользователя страница 37

Alignment

Tips

To accurately align the airFiber radios for best performance, you MUST align only
one end of the link at a time.
You may need to use additional hardware to compensate for issues such as the
improper orientation of a mounting pole or significant elevation differences between
airFiber radios.

Establishing a Link

Adjust the positions of the Master and the Slave to establish a link. The following
section features the airFiber X antenna, AF-11G35:

Note:

 The Master must be aimed first at the Slave because the Slave does not

transmit any RF signal until it detects transmissions from the Master.

1. 

Master

 Visually aim the Master at the Slave. To adjust the Master’s position, adjust

the azimuth and the elevation.
Adjust the azimuth:

a. Loosen the four flange nuts on the two pole clamps.
b. Rotate the antenna to point towards the other end of the link.

c. Tighten the four flange nuts on the two pole clamps.

Create PDF in your applications with the Pdfcrowd 

HTML to PDF API

PDFCROWD

Содержание airFiber AF-11FX
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды