Ubiquiti airFiber 5, Быстрый старт, Страница: 11 / 33

9
airFiber Configuration
airFiber Configuration
The instructions in this section explain how to access the airFiber
Configuration Interface and configure the following settings:
• Wireless Mode Configure one airFiber radio as the
Master
and
the other as the
Slave
.
• Duplex The airFiber radio supports both half-duplex and
full-duplex operation. Half-duplex operation provides more
frequency planning options at the cost of higher latency
and throughput. Full-duplex operation provides the highest
throughput and lowest latency; however, you have fewer
frequency management options.
- Half Duplex (default) The
TX
and
RX Frequencies
can be the
same or different to suit local interference.
Master
Half-Duplex Diagram
Slave
- Full Duplex The
TX
and
RX Frequencies
should be different.
Master
Full-Duplex Diagram
Slave
• TX and RX Frequencies The
TX Frequency
on the Master must
match the RX
Frequency
on the Slave, and vice versa.
RX RX
TX TX
RX RX
TX TX