Ubiquiti airFiber 11FX, Руководство пользователя

Страница: 14 / 58

8
Chapter 2: Installation airFiber AF-11FX User Guide
Ubiquiti Networks, Inc.
airFiber Configuration
The instructions in this section explain how to access
the airFiber Configuration Interface and configure the
following settings:
• Wireless Mode Configure one AF‑11FX radio as the
Master and the other as the Slave.
• Frequency Setting The TX Frequency and RX Frequency
must be the reverse of each other on both the Master
and the Slave.
1. Connect an Ethernet cable from your computer to the
MGMT port on the AF‑11FX radio.
2. Configure the Ethernet adapter on your computer with
a static IP address on the 192.168.1.x subnet.
3. Launch your web browser. Type http://192.168.1.20 in
the address field and press enter (PC) or return (Mac).
4. The login screen will appear. Enter ubnt in the
Username and Password fields. Select your Country and
Language. You must agree to the Terms of Use to use
the product. Click Login.
5. Click Settings, and then click the Wireless tab.
6. Configure the Basic Wireless Settings :
a. For one AF‑11FX, select Master as the Wireless Mode.
For the other AF‑11FX radio, keep the default, Slave.
b. Enter a name in the Link Name field. This should be
the same on both the Master and the Slave.
c. If needed, change the Channel Bandwidth, Output
Power, and/or Maximum Modulation Rate settings.
7. Configure the TX Frequency Setting and RX Frequency.
Note: One airFiber X radio’s TX Frequency is the
other radio’s RX Frequency, and vice versa.
8. Configure the Wireless Security :
a. Select the Key Type, HEX or ASCII.
b. For the Key field:
‑ HEX Enter 16 bytes (eight, 16‑bit hexadecimal
digits: 0‑9, A‑F, or a‑f). You can omit zeroes and
use colons, similar to the IPv6 format.
Note: The airFiber Configuration Interface
supports IPv6 formats excluding dotted
quad and “::” (double‑colon) notation.
‑ ASCII Enter a combination of alphanumeric
characters (0‑9, A‑Z, or a‑z).
9. Click Save Changes.
10. In-Band Management is enabled by default, so each
AF‑11FX radio must have a unique IP Address. (If the
AF‑11FX radios use the same IP Address, you may
lose access to the radios via the DATA ports.) Click the
Network tab.