7
CONNECTING THE NETWORK
Attention:
~ Before connecting the wireless network, please make sure that your smart phone (not included) was
connected with a Wi-Fi network.
~ While connected to the power source, your Wireless Speaker & Charging Hub will access to the
network connecting mode directly with white Wi-Fi indicator
fl
ashes fast.
~ You can stream musics to your Wireless Speaker & Charging Hub after connected with Wi-Fi
network, choose the music and control playback on the your smart phone or on your speaker
device.
Connecting Wi-Fi with Google Home:
1. Click Google Home to enter the APP interface and tap "+" on the left top side to access "Add
and manage" interface.
2. Click "Set up device"
then
"Set up new devices" to access "Choose a home" interface.
3. Select a name from the home list or you can create a new one while choose "Create another
home".
4. Click "Next" to look for your device (e.g. Ubiolabs-WSP1001-2058).
5. Click "Next" to access "Connecting to Chromecast built-in speaker...", a test sound will be heard to
inform you that you're connected to the right Chromecast built-in speaker.
6. Click "Yes" to access "Help improve Chromecast built-in speaker" and then click "Yes, I'm in" to
select your region then click "Continue" to access "Where is this device?" interface.
7. Select a location and click "Next" to access "Connect to Wi-Fi" interface.
8. Choose a Wi-Fi network, click "Next" to enter the Wi-Fi password and con
fi
rm by clicking
"Connect". A sound will be heard to con
fi
rm that the network has been connected completly and
indicator on top of your device will light with solid white.
9. Click "Continue" to link your chromecast built-in speaker and click "Next" to complete almost
setup.
10. Choose a sample clip to learn how to cast, then tap the Cast button and select your speaker, a
sound will be heard while playing through your speaker.
11. Click "Finish Tutorial" and
fi
nd something to listen to.
Connecting Wi-Fi with Home APP:
1. Click "Home" APP and tap "Add Accessory" to access add accessory interface.
2. Click "I Don't Have a Code or Cannot Scan" to look for nearby accessories.
3. When your device has been found, tap it simply and click "Allow" to com
fi
rm the connecting.
4. While the device has been connected correctly, "Accessory added" shows on Home APP and
your new accessory is ready to use.
5. Click "Done" on the right top of interface to complete with default device name, or you can create
a new name for it.
Note:
●
While connecting to Wi-Fi network, make sure that your smart phone has already downloaded
the Google Home or Home APP.
●
If you want to connect with another Wi-Fi network, press and hold Play/Pause button until
the Wi-Fi indicator
fl
ashed fast, then following above steps to connect with a new Wi-Fi network.
