Ubert Top Line, Руководство пользователя

Страница: 18 / 40

18 Operation
Printed: 01/2018 Subject to change! TopLineUserManual.docx
Time-Display (lower 7-segment)
Shows time / start delay at operation level.
Shows parameter data at programming level.
If no program is running and a program is selected:
Total set time of the selected program.
Push to change start delay. (
11
starts to flash); by pushing up/down button
/
the start
delay can be changed; push again to enter the change.
If the PA program is selected:
Set time of the PA program
Push to change set time.(
12
starts to flash); by pushing up/down button
/
the set time
can be changed. If the time is set to 00:00, the PA program will run endless.
Push again to change start delay.(
11
starts to flash); by pushing up/down button
/
the
start delay can be changed; push again to enter the change.
If a program is selected and running:
Remaining delay time during start delay.
Remaining total time while program is running.
Keep
pushed to show the total set time of the running program
If PA program is selected and running:
Remaining delay time during start delay.
Remaining total time while running or “Endl” (for endless) in case the set time = 00:00 .
If a certain time was preset, push
to change the remaining set time. (
12
starts to flash); by
pushing up/down button
/
the set time can be changed.
Temperature Button
If a program is selected and running:
Keep pushed to show the set temperature of the current step of the selected, running
program in the Temperature-Display
.
If PA program is selected:
Push to change set temperature.
Up Button
At operation level:
Push to select next program.
If PA program is selected:
Push to increase settings.
At programming level:
Push to increase parameter data.
Down Button
At operation level:
Push to select preceding program.
If PA program is selected: