Ubert KT 700, Руководство пользователя

Страница: 16 / 30

16 Operation
printed: 02/2015 Subject to change!

TopLineUserManualKT.docx
Switch - lighting: The lighting of the unit supports efficient illumination of the unit and
ensures product presentation at its best. The lights are activated when
the light in the switch is illuminated.
Temperature control: With the temperature control switch you can choose the desired cool-
ingpower. 1 equals the minimum , 7 equals the maximum cooling pow-
er.
GN - pan Stuffing just 4
inch (max.)!
5.3 Operation
Cutting Board: To cut your products and do various other work during loading, unload-
ing packing an the like.
Motive-Sets: The Motive-Sets are sales promoting picture sets for the Dia-
Menueboard.
Intermediate Shelf: The Intermediate Shelf is located above the GN-pans for additional
storage space.
Timer (only UL-version): The timer is left next to the switches for the illumination and the fan.
The cycles can be programmed free and it can be set any time.
5.4 Operate the Timer (UL-version only)
 You program the timer by the tabs.
 The figures on the scale are synonymous for the time.
 The time can be switched in half hour steps (one tab = an half hour).
 Pull all the tabs continuosly towards you, that are in the periode, the Cold
Display Cabinet should be swtiched on (tab pulled out = unit switched on
/ tab pushed in = unit switched off).
 Now adjust the present time by turning the scale in arrow direction as far
as the corresponding figure is above on the scale, in front of the mark
that is on the ring behind.
 Now the Timer is programed.
 This program repeats daily until you change it.