background image

To prevent injury to the user or other people and property damage, these instructions must be followed.
Incorrect operation due to ignoring of instructions may cause harm or damage.

Your air conditioner should be protected from 

moisture,e.g. condensation, splashed water, etc.

Do not place or store your air conditioner where it

can fall or be pulled into water or any other liquid.

In such case, unplug immediately.

Always transport your air conditioner in a vertical

position and stand on a stable, level surface during

use.

Turn off the product when not in use.

Always contact a qualified person to carry out

repairs. If the power supply cord is damaged it

must be repaired by a qualified technician.

Keep a free area of at least 1 ft (30 cm) all around the

unit from walls, furniture and curtains.

If the air conditioner is knocked over during use,

turn off the unit and unplug from the main power

supply immediately.

!

Always do this

Do not operate your air conditioner in a wet room

such as a bathroom or laundry room.

Do not touch the unit with wet or damp hands or

when barefoot.

Do not press the buttons on the control panel with

anything other than your fingers.

Do not remove any fixed covers. Never use this

appliance if it is not working properly, or if it has

been dropped or damaged.

Never use the plug to start and stop the unit.

Always use the switch on the control panel.

Do not cover or obsturct the inlet or outlet grilles.

Do not use hazardous chemicals to clean or to come

into contact with the unit. Do not use the unit in the

presence of flammable substances or vapours such

as alcohol, insecticides, petrol,etc.

Do not allow children to operate the unit

unsupervised.

Do not use this product for functions other than

those described in this instruction manual.

Never do this

Energy Saving Tips

Use the unit in the recommended room area.
Locate the unit where furniture cannot obstruct the air flow.
Keep blinds/curtains closed during the sunniest part of the day.

Keep the filters clean.

Keep doors and windows closed to keep cool air in and warm air out.

Safety rules

SAFETY PRECAUTIONS

Be sure the electrical service is adequate for the model you have chosen. This information can be found

on the serial plate, which is located on the side of the cabinet and behind the grille.

Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is

important. The power cord is equipped with a three-prong grounding plug for protection against shock

hazards.

Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend

to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified

electrician install a proper receptacle.
Ensure the receptacle is accessible after the unit is installed.

WARNI NG

For your safety

Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other

appliance.

Prevent fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove

any prongs from the power cord.

WAR NI NG

Electrical Information

 2

Содержание 87795040

























Отзывы: