- During dehumidifying mode,remove the drain
plug from the back of the unit. You can also connect
For models without
a drain connector, just attach the drain hose to
the hole. Place the open end of the hose directly
over the drain area in your basement floor. Please
refer to Fig.19 & 20.
- When the water level in the bottom tray reaches
a predetermined level,
Carefully move the unit to a drain location,
remove the bottom drain plug and let the
water drain away (Fig.21). Reinstall the bottom
drain plug and restart the machine until the P1
symbol disappears. If the error repeats, call for
service.
"
"
the unit beeps 8 times and
the digital display area shows P1 . At this time
the air conditioning/dehumidification process will
immediately stop. However, the fan motor will
continue to operate (this is normal).
"
"
Fig.19
Fig.20
Fig.21
INSTALLATION INSTRUCTIONS
Water drainage:
a 3/4''(1.9cm) garden hose (sold separately) onto
the drain connector (5/8''(1.6 m) universal female
mender already on the unit).
12
R emove the
drain plug
Continuous
drain hos e
Drain plug
Bottom drain plug
Содержание 87795040
Страница 1: ...87795040 MPS2 10CRN1 BH9 ...
Страница 2: ......
Страница 21: ...INSTRUCTIONS 19 When this button is pressed in the first 30 control sends control displays control sends ...
Страница 23: ...h On Stop Set setting 3 home Example Start Example Off Stop Start h Set CAUTION INSTRUCTIONS 21 ...