16
W2
O
1/
O
2/
O
3
X
J
1
2
3
4
5 1
2
6
J
P1
P1
P2
J
4
5
P2
7
P3
Illustration 2
IMPORTANT:
● Make sure that each screw installed on this step is attached to a spacer (X).
● Wait at the end of the installation of the roof panels before tightening all screws. If you
do not wait and tighten from the beginning, you will not be able to correctly install all the
roof panels.
10. Install the roof plates starting from left to right.
Slide #1 Roof Panel 1 into position. Then overlap #2 Roof Panel (2) as shown and slide
#2 Roof Panel (Part N2) into position.
Attach #1 Roof Panel (1) and #2 Roof Panel (2) to #3 Roof Supports (O1) with a Bolt (W2)
and spacer (X).
Slide #3 Roof Panel (3) into position. Attach #3 Roof Panel (3) and #2 Roof Panel (2) to
#3 Roof Supports (O1) with a Bolt (W2) and Spacer (X).
Slide #4 Roof Panel (4) into position. Attach #4 Roof Panel (4) and #3 Roof Panel (3) to
#4 Roof Supports (O2) with a Bolt (W2) and Spacer (X).
Slide #5 Roof Panel (5) into position. Attach #5 Roof Panel (5) and #4 Roof Panel (4) to
#4 Roof Supports (O2) with a Bolt (W2) and Spacer (X).
Sliding #1 Roof Panel (1) into position. Then overlap #2 Roof Panel (2) as shown and
