8
SOAPY
SOAPY
SOAPY
SOAPY WATER
WATER
WATER
WATER TEST
TEST
TEST
TEST
�
The soapy water test must be performed each time the gas cylinder is connected to your
appliance or each time the appliance is used.
�
The soapy water test must be performed outdoors in a well-ventilated area.
�
When performing the soapy water test, always keep burner away from open flames,
sparks, or lit cigarettes.
�
The UBERHAUS Outdoor Propane Burner is designed to operate with propane gas only.
This product will not operate with natural gas.
�
Never use an open flame to test for gas leaks.
�
Always remove any cookware from burner stand when performing the soapy water test.
PROCEDURE
PROCEDURE
PROCEDURE
PROCEDURE
：
1.
Remove any cookware from your burner stand.
2.
Turn regulator or needle valves to OFF position, and turn the gas cylinder valve to the OFF
position.
3.
Prepare your soapy water solution by combining(1) one part dishwashing liquid with (3)
three parts water to test for the possibility of any gas leaks in the hose or connections to
regulator and the regulator connection to gas cylinder. Apply soapy water solution to the
gas cylinder valve, regulator hose and any other connection.
4.
Turn gas cylinder valve ON (regulator control valve is in the OFF position) and observe
gas cylinder valve for bubbles. Do not leave gas on for more than 12 seconds. If bubbles
appear, stop, turn gas cylinder OFF, and retighten the fitting. Repeat test.
5.
When the gas cylinder has been tested, open the regulator control valve one full turn and
check for bubbles at regulator control valve, along the entire length of hose and at the
connection to the burner. DO NOT LEAVE GAS ON FOR MORE THAN 12 SECONDS. If
soapy mixture starts bubbling, gas is leaking through the connection or hose. Turn the
regulator valve OFF and then the gas cylinder OFF and retighten the connection that is
leaking gas. After test is complete, and there are no leaks, wait a minimum of 5 minutes
for gas fumes to diminish before lighting cooker.
DURING
DURING
DURING
DURING ANY
ANY
ANY
ANY PORTION
PORTION
PORTION
PORTION OF
OF
OF
OF THE
THE
THE
THE SOAPY
SOAPY
SOAPY
SOAPY WATER
WATER
WATER
WATER TEST,
TEST,
TEST,
TEST, IF
IF
IF
IF BUBBLES
BUBBLES
BUBBLES
BUBBLES CONTINUE
CONTINUE
CONTINUE
CONTINUE TO
TO
TO
TO
APPEAR,
APPEAR,
APPEAR,
APPEAR, STOP,
STOP,
STOP,
STOP, DO
DO
DO
DO NOT
NOT
NOT
NOT USE
USE
USE
USE AND
AND
AND
AND CONTACT
CONTACT
CONTACT
CONTACT YOUR
YOUR
YOUR
YOUR LOCAL
LOCAL
LOCAL
LOCAL PROPANE
PROPANE
PROPANE
PROPANE DEALER
DEALER
DEALER
DEALER
.
Lighting
Lighting
Lighting
Lighting Instructions:
Instructions:
Instructions:
Instructions:
1.
Check the regulator control valve to be certain it is in the OFF position and perform soapy
water test before each use.
2.
Open lid if applies and turn gas cylinder valve ON. USE a long match or spark igniter
through the burner lighting hole. Slowly turn on the regulator control valve or needle valve
until the burner lights.(If burner does not light within 5 seconds, turn regulator control valve
OFF then the gas cylinder valve OFF. Wait 5 minutes for fumes to diminish before
relighting.)
