Fig.7:
Insert top connector (M) into the middle of the top crossbeam, then fasten it with spring fastener.
Fig.8:
I
nsert top connector (L) into the middle of the top crossbeam (N).
Fig.9:
Insert slanted beam (I) and straight beam (J) into top crossbeam (N) and top crossbeam (M).
Repeat on each side.
Fig.10:
Insert slanted beam
（
I
）
into the middle of the top crossbeam (N). Repeat on each side.
Fig.11:
Attach lower part of straight beam (J) to valance tightly with bolt (AA) and flat washer (BB).
Tighten fully.
EE
Φ
8x180 stake
16 PCS
FF
Plastic loop
104
PCS
Hardware Pack 3
