d H icon will be
blinking. Within 5s, press + or - button to adjust the time
+ or - button once will increase or decrease the time by 0.5h. Hold + or - button
for 2s, to change increments faster. Release the button after your required set time
H icon will stop
blinking.
H icon will be
blinking. Within 5s, press + or - button to adjust the time
+ or - button once will increase or decrease the time by 0.5h. Hold + or - button
for 2s, to change increments faster. Release the button after your required set time
H icon will stop
blinking.
s set up, press TIMER button once to
review the remaining time. Within 5s, press TIMER button again to cancel this
function.
Replacement of Batteries in Remote
Control
1. Press on the tab“ ” on back cover of remote
controller with fingers as shown in the
figure on the
right, and
remove the cover along the arrow direction.
Battery
Cover of battery box
Remove
Reinstall
2. Replace with two AAA, 1.5V dry batteries.
Make sure positions for “+” pole and “-” pole are
correct.
3. Reinstall back cover.
Note:
●
The distance between signal sender and receiving window should be no more
than
26 ft (8 m)
, and there should be no obstacles between them.
●
The remote control's signal may be hindered by fluorescent lighting or wireless
devices; in such cases, please get closer to the air conditioner to activate the
remote control.
Replace new batteries of the same model when replacement is required.
When the remote control won't be used for a long time, please take out the
batteries.
●
●
7
8
9
TIMER button
Press “+” and “-“ buttons simultaneously to lock or unlock the keypad. If the remote
Combination of "+" and "-" buttons: to lock/unlock the remote control
When unit is OFF, press "MODE" and "-" buttons simultaneously to switch between
℃
and
℉
.
Combination of "MODE" and "-" buttons: to alternate between ºC / ºF
control is locked,“ ”will point to“ ”. In this case, if you press any button, “ ”
blinks three times.
23
Operation Guide
