3
(outlet/power strip)
13. To avoid fire or shock hazard, plug the unit directly into a grounded 120 V AC electrical outlet.
Do not remove the plug’s grounding prong and do not use 3-prong adapters in 2-prong
receptacles. DO NOT attempt to defeat this safety feature, because it could lead to an electric
shock hazard.
14. To disconnect heater, turn controls OFF, then remove plug from outlet. Pull firmly on the plug,
DO NOT unplug by pulling on the cord.
15. Always unplug the heater while not in use.
16. This appliance is intended only for household use as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The
use of attachments not recommended or sold by unauthorized dealers may cause hazards.
17. Always use on a dry, level surface. Use on the floor only.
18. DO NOT use outdoors.
19. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any solid-
state speed control device.
20. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so
will void your warranty. The inside of the unit contains no user serviceable parts. Qualified
personnel should perform all service.
21. Connect to properly grounded outlets only.
SAVE THESE IMPORTANT INSTRUCTIONS FOR FUTURE REFERENCE
.
SPECIFICATIONS
Voltage Rating
120 V (60Hz)
Power Consumption
1500W
Unit Size
13.4
in. (W) x 15.0in. (D) x 8.46in. (H)
Unit Weight
19.84 lbs
SAFETY FEATURES
Tip-Over Safety Feature
This heater is equipped with a tip-over safety feature. If the heater is tipped over, an internal switch will
automatically shut the heater off. Once the heater is restored in an upright position, the heater will reset.
To continue operation, turn on the heater using the supplied remote control or the control panel on the
heater.
Overheat Safety Feature
This heater is equipped with a overheat safety feature. If the heater’s internal components reach a
certain temperature that could cause overheating or possible fire, the heater will automatically shut off.
WARNING
: It is normal for the power cord to feel warm to touch; however, a loose fit between the
outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a
different outlet. Contact a qualified electrician to inspect the original outlet for damage.
