Uberhaus 02435000, Руководство пользователя

Страница: 4 / 17

PANEL FUNCTION DESCRIPTION
1. POWER KEY
Press to turn unit "ON" or "OFF".
2. FUNCTION SELECTOR
Press this key to select COOLING, HEATING, DEHUMIDIFICATION or FAN.
※
In dehumidifying mode, when “dh” is displayed, temperature cannot be set.
※
In fan mode, when “FF” is displayed, temperature cannot be set.
※
When in standby mode(off mode), press [mode] (function key) for 10
seconds to switch temperature from Celsius to Fahrenheit . (Note: default
setting is Celsius)
3. TEMPERATURE CONTROL KEY (UP)
In cooling mode: This key to increase the preset temperature by 1ºC each time it is pressed,
to a maximum of 30ºC (90ºF).
In heating mode: This key to increase the preset temperature by 1ºC each time it is pressed,
to a maximum of 25ºC (80ºF).
4. TEMPERATURE CONTROL KEY (DOWN)
In cooling mode
：
This key lowers the preset temperature by 1ºC each time it is pressed, to a
minimum of 17ºC (65ºF).
In heating mode: This key lowers the preset temperature by 1ºC each time it is pressed, to a
minimum of 15ºC (60ºF).
5. LED DISPLAY
Indicates the temperature or the time setting. After any time set the display will return to the
preset set temperature.
6. SPEED
Press to select LOW, MEDIUM, HIGH or AUTO fan speed.
If "AUTO" is selected (in cooling mode),”HIGH” or "MEDIUM" or “LOW" will be selected
automatically according to the difference between setting temperature and room temperature.
Note: In heating and dehumidifying modes, the wind-speed setting cannot be changed because
the unit has been pre-set to high-speed (heating) or low-speed (dehumidifying).
7. PROGRAMMABLE TIMER
Programmable timer ON/OFF key.
TIMER-ON: The timer-on is used to turn on the unit automatically after the set time is over.
1. Press "Timer"key at stand-by status(off mode) to set the time. After setting the time, then
choose the function you need.(cooling, heating, dehumidifying, and fan mode(FF).)
2. Once the set hour has come to an end, the unit will turn on automatically.
3. Press the "POWER" key before time out, the set time will be cancelled and the unit will
turn on.
※
After time setting, displaying time will flash for seconds. Please choose the function after
the flashing is stopped.
TIMER-OFF: The timer-off is used to turn off the unit automatically after the setting time is
over.
1. Press the "TIMER" key at operating mode status to set the time desired.
6
5