Installing and Connecting the Device
Ubee Interactive
10
Ubee DVW2110 Wireless Voice Cable Modem and Router Subscriber User Guide • December 2011
an internet browser installed, such as Netscape or Internet Explorer. The following
browsers are supported:
For Windows 2000, XP, Vista, Windows 7: Firefox 1.07 and higher, Internet
Explorer v7 and above, Netscape.
For MAC OS X, 10.2, and higher: Firefox 1.07 and higher, Safari 1.x and higher.
4. Using the power supply included in the product package, connect the power cord to
the
POWER
outlet on the back of the modem and connect the other end into the
power outlet.
Warning
: Use only the power adaptor shipped with this device. Failure to do so may
cause damage the device.
5. Using the Ethernet cable included in the product package, connect one end of the
Ethernet cable to your computer’s Ethernet port, and connect other end to the
ETHERNET
port on the cable modem.
6. Connect the coaxial cable from the cable wall outlet or a cable splitter connected to
the cable wall outlet to the
CABLE
port on the device.
7. Connect one end of an RJ11 phone cable provided in the product package to one of
the TEL ports on the device (a port that has been provisioned for voice service as
specified by the service provider). Connect the other end to the phone port of the
telephone.
Note
If voice service is not provisioned through the service provider, telephone service is
not available.
2.2
Connecting a Device to Your Network
Use one or more of the following sections to connect network devices and validate device
functionality.
Connecting an Ethernet Device on page 10
Connecting a Wireless Device on page 11
Connecting a Telephone on page 12
Troubleshooting the Installation on page 13
2.2.1
Connecting an Ethernet Device
You can connect a device to your network, such as a computer, using an Ethernet cable.
