Ubee Interactive
Understanding the DDW262.G Front Panel and LED Behavior
Ubee DDW262.G Wireless Cable Modem and Router Subscriber User Guide • September 2011
9
1.9
Understanding the DDW262.G Front Panel and LED Behavior
The DDW262.G has several LEDs that provide the status of the device. The following
image and the table describe LED behavior.
LED COLOR
DESCRIPTION
POWER
Green
On
—Device has successfully completed internal power-on tests.
Blinks
—Device has failed the power-on self test.
SYNC
Green
Indicates the connection status between the device and the cable network.
On
—Device has established a downstream channel connection with the
MSO’s cable modem termination equipment.
Blinks
—Device is registering with the network.
Ready
Green
Indicates the device has completed the ranging registration process and is
ready to send and receive data.
On
—Device has completed ranging/registration process and is ready to
send and receive data.
Blinks slowly
—Performing upstream ranging.
Blinks quickly
—Acquiring IP address and configuration file.
Off
—Device receives disable configuration file message.
WLAN
Green
On
—At least one wireless client is connected to the device.
Blinks
—Device is receiving modem traffic.
Off
—Device is not connected to any wireless clients.
WPS
Green
On
—WPS used.
Off
—WPS not used.
ETHERNET 1,2,3,4
Green or Orange
Indicates connectivity between the Ethernet port on the device and the
Ethernet port of the PC or MAC.
On
—Ethernet ports are connected between the device and computer:
Green - 100Mbps
Orange - 10Mbps
Blinks
—Sending or receiving data.
Note: Sync and Ready LEDs blink during a firmware upgrade and remain solid when complete.
