manualshive.com logo in svg

Ubee DDC2700, Руководство для пользователя-абонента

Поделиться
Скачать
Ubee DDC2700 Скачать руководство пользователя страница 33

Ubee Interactive

4.2.2   Gateway - Setup

DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010

29

WAN Connection Type

Select the WAN connection type. For each type, different 
data entry is required, as explained below:
1. DHCP: The WAN interface is set to be a DHCP client, 

and the IP address is assigned by the service provider’s 
DHCP server. For more detailed configuration of the 
DHCP server on the device, refer to 

page 30

.

2. Static IP: For Static IP, you must manually enter the IP 

address for the WAN interface.

3. PPTP (DHCP): For Point to Point Tunneling Protocol 

(PPTP), you must enter a username, password, and the 
PPTP server’s hostname or IP address.

4. PPTP (Static): For Point to Point Tunneling Protocol 

Static (PPTP), you must enter the static IP address, IP 
mask, default gateway, username, password, and the 
PPTP server’s hostname or IP address.

Host Name

Enter the host name for the router. This may be required by 
some service providers.

Domain Name

Enter the domain for the router. This may be required by 
some service providers.

MTU Size

Enter the Maximum Transmission Unit size, which defines 
the largest size of the packet or frame that the device can 
transfer (256-1500). If this is not given by the Service 
Provider, leave it as is using 0 for the default.

Apply

Click to save all changes made in the screen.

Label

Description

Содержание DDC2700


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды