38
Seats
The front seat back inclination angle is adjusted by rotating knob 2
(Fig. 3.6).
Some versions of the driver's seat allow installation in four various
longitudinal positions. To change the position: remove the seat, unscrew
bolts fixing the seat cushion to the seat frame (reverse side of the seat),
shift the seat cushion and screw the bolts in.
The driver's seat is adjusted longitudinally by lever 3: pull the lever
located under the seat cushion which blocks the longitudinal movement
of the seat and move the seat to the desired position. When the adjustment
is finished, release the lever and make sure that the seat is securely fixed
by moving it back and forth with the lever released.
Front seat dismounting:
-unscrew thumb-nut 1 and tilt the seat forward;
-remove stud bolts on the seat from bushes 4 located on the wheel
arch, remove the seat.
To install the seat, insert stud bolts into bushes, tilt the seat back, and
tighten thumb-nut 1.
Some vehicles may be equipped with non-adjustable seats.
ATTENTION!
Do not adjust the driver's seat when the vehicle is
in motion.
ATTENTION!
The "universal" child restraint system is mounted
with the use of vehicle safety belts. Children under 1.5 years of age shall
sit in the child restraint device only facing backwards.
Fig. 3.6. Front seat:
1 — thumb-nut; 2 — seat back inclination
adjustment knob; 3 — seat longitudinal adjustment
fixation lever (driver's seat); 4 — bushes
